![]() Double-check the power steering level, to ensure that the level is correct. Ensure you don’t hear any whining or groaning from the power steering. Once you have the correct level, reinstall the cap and take the car for a spin. If you add more fluid, you should remove some using a fluid transfer pump. DO NOT overfill the power steering reservoir beyond the High/Max mark. If the level is below the MIN mark, add power steering fluid to bring the level up, but be careful to stay under the MAX mark. Remove the cap again and check the fluid level on the dipstick. STEP 5: Reinstall the cap back on the reservoir. Be careful not to get any contaminants in the reservoir. ![]() As you pull the cap, have a rag in hand to wipe off the dipstick. ![]() If you can’t remove the cap quickly, you may find removing the engine air tube easier. STEP 3: Remove the reservoir cap by twisting the cap counterclockwise. Clean the reservoir cap with a clean cloth to avoid debris falling in. STEP 2: Locate the power steering reservoir. Next, open the hood by pulling on the hood release. Turn the steering wheel from lock to lock a couple of times. STEP 1: Start the car and wait until it reaches the average operating temperature. Steps to check and add power steering fluid
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |